Barix Reflector Service – STL over IP without the complexity of IP
icon4 09 26th, 2011| icon3Comments Off on Barix Reflector Service – STL over IP without the complexity of IP
When Barix announced the Reflector Service, our customers wondered what this would be useful for …
Barix is well known for its Audio over IP streaming products such as the Exstreamer. So far so good – the devices are perfectly useful and reliable for a host of IP Audio applications, from STL (Studio Transmitter Link) to Paging, Intercom and Surveillance applications.
The AoIP (Audio over IP) devices from Barix are easy to configure and use, but setting up Audio Distribution over the Internet is not very easy for non- IT techies.
In addition, “static IP” addresses are needed for a reliable link – something often not easily available from the ISP, if at all, or at a cost.
Barix realized there is something to do .. and invented the Reflector Service. Because we are not hosting providers – this is not our core know how – we teamed up with the leading, high quality partner Streamguys to provide a reliable service to Broadcasters and other customers who easily want to set up a point-to point or point-to-multipoint audio distribution solution over the internet.
StreamGuys are a professional hosting organisation with all the necessary infrastructure in place to operate and support the service 24/7. Customers who are interested in the Reflector Service just need to purchase a Barix encoder and a Barix decoder device (for example, 2x the Exstreamer 500, which can serve both purposes). Depending on the device type, firmware might need to be loaded to support the Reflector service (Exstreamer 500 comes preloaded !).
From there, things are very simple – at least for 90% of the customers:
– Install the encoder and the decoder at the locations between which you want to establish the audio feed
– Go to the reflector website, set up your project, add the two MAC addresses of the device, specify encoder and decoder
– you can do some tweaks in regards to the encoding quality, attenuation, output level and buffering, if you dislike the defaults
.. and that’s it ! The devices will, within seconds, start establishing the tunnel for audio and contact closure forwarding and streaming will commence.
The “zero config” capability of the devices, of course, only works if your local network where these are installed supports DHCP and a “free view” of the internet. This is the case in most places where a DSL or cable router is used. If you need to manually configure an IP address, net mask, router, you can of course do so using a standard web browser.
To find out more about the Barix Reflector Service, visit http://www.barix.com/Reflector_STL_made_simple/1551/
To sign up for a trial, customers can simply request an account using the following links:
StreamGuys will then contact the customer and arrange all the necessary details.

So, do not limit your imagination about where to use the Reflector Service to Broadcast, Studio Transmitter Links ! The service can universally be used where Audio needs to be reliably transported from “a” to “b” over the Internet, being it for contribution, commentary or STL in the Broadcast area, being it for remote surveillance, or being it to deliver Audio to a remote bus or train station … wherever you want to distribute Audio over the Internet, the Barix Reflector solves the mystery of IP and lets you focus on the important things of your business !

Johannes

Barix Instructional Videos
icon4 09 21st, 2011| icon3Comments Off on Barix Instructional Videos

All,

Barix is proud to announce the launch of the BarixAG YouTube channel.

We are currently producing a series of instructional and marketing videos for our IP Audio devices and also the Barionet product family. The first video, a basic introduction to the Exstreamer, has been released and posted !

Here is the link to our YouTube channel: http://www.youtube.com/user/BarixAG

.. and here is the direct link to the Video: Barix Audio over IP Video

More videos will follow soon and we will inform you via this blog.

If you have any suggestions, comments etc, please let us know via our contact form on the website or send us an email to “info” at barix.com – we are happy to learn from you what we do good and what we can do even better !

Johannes

Barix IP Audio Solution Entertains, Informs at Maldives Islands Resort
icon4 09 16th, 2011| icon3Comments Off on Barix IP Audio Solution Entertains, Informs at Maldives Islands Resort

Barix IP solution supports multi-language communications for security, entertainment and public address

ZURICH, SWITZERLAND, September 14, 2011 — Barix Audio over IP solutions are now live at the Holiday Inn Kandooma Resort in the Maldives Islands, distributing high-quality, multi-lingual voice and music to its guests in nine zones. The system, installed by local systems integration firm EIT Private Limited, delivers audio to multiple points, creating a unified, resort-wide notification and entertainment system.

The Kandooma Resort is a full-service, 160-room resort located on Kandooma Island on the South Male Atoll in the Maldives Islands, renowned for its world-class diving and surfing. Besides its beautiful, oceanside setting, the Kandooma Resort is noted for its advanced technology, providing free Wi-Fi, iPod docking stations, and flat-screen TVs with satellite programming to guests.

Barix met resort requirements for high performance, reliable presence and security applications over the IP network at a reasonable cost. Mohammed Afzal, director of EIT Private Limited, stressed the importance of the system’s scalable topology.

“Barix provides a multi-purpose PA system that is easily expandable to accommodate future growth at the resort, which was very important,” said Mohammed Afzal, director of EIT Private Limited. “The system streams in-house music, live paging and recorded messages. It also supports multi-language playback, which is helpful in emergency situations. No other company serving our market could provide a solution that met the resort’s requirements.”

Afzal added that Barix devices are open and easy to customize. “Barix gives us the flexibility to customize intercom and other applications with the existing hardware,” said Afzal. “The programming language is easy to understand and helpful to companies that want to build custom solutions for their customers.”

The complete solution includes a Barix Annuncicom PS16 Paging Station at the core. The PS16 is a multifunction, standalone IP intercom, paging and PA master station that connects to multiple end devices without the need for PCs or server software.

Resort staff can deliver live pages and announcements from the PS16 to Barix Exstreamer 100 IP audio decoders in nine zones with a single press of the button, targeting messages to specific zones or buildings; or initiating “all-call” announcements.

EIT Private Limited also installed one Barix Annuncicom 100 two-way audio device to override the network-wide audio stream in emergency situations. The Annuncicom is responsible for streaming pre-recorded security announcements to the Exstreamers in all zones. Nine amplifiers and 200 loudspeakers support playout across the grounds.

Barix IP Audio Solution Delivers Retail Radio Program to 300 Penny Market Italy Stores
icon4 09 8th, 2011| icon3Comments Off on Barix IP Audio Solution Delivers Retail Radio Program to 300 Penny Market Italy Stores

ZURICH, SWITZERLAND, September 6, 2011 — Barix announces a major in-store media win that encompasses the rollout of an IP audio system to 300 retail stores in Italy to enhance the shopper experience.

Penny Market Italy, a leading discount chain in Italy, is delivering music, advertisements and unique national-scale promotions to all 300 stores through “Penny FM,” a live audio program stream that acts as a branded retail radio station. Barix Audio over IP solutions support reliable distribution of the stream to the individual stores, which is broadcast in real time.

“Penny FM adds a touch of personality to the shopping experience through dedicated programs tailored to the customer,” said Mirko De Dominicis, Network and Security Manager, Penny Market Italy. “The Barix IP audio solution improves the image of our stores and makes a positive impact on staff and customers. Penny FM provides the right balance of entertainment and information, while increasing point-of-purchase sales and generating new revenue streams through advertising.”

Founded in 1994, Penny Market Italy is a joint venture between the REWE Group in Germany and the Italian retail chain Esselung. Today, Penny Market has 300 stores in 10 regions, 2,400 employees and nearly one billion euros in annual sales. In 2006, REWE Group Austria deployed a Barix in-store media system to nearly 2,000 supermarkets (MERKUR and BILLA) and perfume stores (BIPA).

The Barix solution reliably delivers superior audio quality to all stores without monopolizing network bandwidth. Penny Market Italy uses three Barix Instreamer encoders and leased lines to send audio streams to a server farm. Barix Barionet IP control devices build unicast streams for each store at the server farm and deliver the streams over an MPLS network. The Barix Replicator application, running on the Barionets, delivers main and backup streams to Barix Exstreamer IP decoders at the stores. The Exstreamers decode the streams for playout over their corresponding loudspeakers.

“This Barix IP Audio solution offers significant savings for Penny Market Italy as it offers reliable, direct connectivity through its existing IP network infrastructure,” said Johannes G. Rietschel, CEO and Founder of Barix AG. “Network bandwidth costs are minimized, and the lack of media server and PC infrastructure requirements nearly eliminates maintenance.”

Penny Market Italy also uses the Barix Barimon monitoring tool to monitor all Barix devices through a dedicated server. Operators can update device configurations on the fly over the same server.

“The Barix experience has been very positive, providing Penny Market Italy with a new winning technology model to support the retail environment, which is in constant evolution,” added De Dominicis.

Barix Debuts Exstreamer 205 at IBC for In-Store and Hospitality Environments
icon4 08 31st, 2011| icon3Comments Off on Barix Debuts Exstreamer 205 at IBC for In-Store and Hospitality Environments

Built-in amplifier, local input adds value for businesses broadcasting “retail radio” and multi-room distribution applications

ZURICH, SWITZERLAND, August 29, 2011 — Barix AG comes to IBC 2011 (September 9-13, RAI Exhibition Centre, Amsterdam, Booth #3A48) with its next-generation Exstreamer IP Audio device for multipoint networks.

The Exstreamer 205 IP makes retail and hospitality applications dramatically simple. Each room or location requires a single Exstreamer 205, a network connection and power outlet, two common high-quality audio speakers and minimal wiring.

The device delivers a wealth of features to simplify infrastructure and reduce deployment costs for in-store media systems. Its built-in 2×25 watt, power-efficient class-D amplifier minimizes equipment needs at the end point, lowering costs while retaining superior audio quality. Businesses can distribute branded retail radio broadcasts, customized “store and play” programs, or simple background music streams to as many locations as the network can support, without the need for separate amplifiers.

The Exstreamer 205 is also the first Barix IP audio device to add a local, line-level stereo input. This allows direct connection of an in-zone audio source to the device for local playout. This is ideal where local, non-streaming content is available, whether from a guest’s iPod or a digital signage system.

“Exstreamer customers have requested an audio input to feed local content into the device, using its powerful, integrated high-quality amplifier,” said Johannes G. Rietschel, CEO and Founder of Barix. “This gives our customers more options for where to use Exstreamer products. Hotel and spa treatment rooms in larger hospitality systems are perfect examples.”

Businesses operating digital signage systems can also benefit from adding the Exstreamer 205 to out-of-home networks. Operators can establish a general background stream for the entire network, with the flexibility to interrupt the stream and play out local content at any location. Offline content protection is enhanced via a MicroSD slot, which enables local playout of (encrypted) content directly from the device while minimizing opportunities for theft or modification.

The Exstreamer 205 also offers priority ports for connection into a master paging system, such as the Barix Annuncicom PS16. This allows a facility manager, security guard or other operator to break into the network stream to make a page or announcement — also overruling any local audio sources.

Like previous models, the Exstreamer 205 decodes and plays multi-protocol and multi-format audio streams, including MP3, AACplusV2, WMA, PCM, G.711 and EtherSound. Volume and channel selection is controllable via an API through IP or serial port, a built-in IR receiver or the Barix Volume Source Control (VSC) device.

Successful trade show in South Africa with our Distributor TID
icon4 08 15th, 2011| icon3Comments Off on Successful trade show in South Africa with our Distributor TID

Barix IP Audio products produced high interest at the Mediatech trade fair in South Africa !
Our Distributor, Technology Innovated Distribution (TID) showcased a live Audio over IP link and the full range of products covering IP Audio, VoIP, SIP and IO device servers – all Barix products were on display.
Here is an impression of the show:

Picture of the Booth

Mediatech Booth in South Africa 2011

Barix Display

Barix IP Control Devices Provide Automated Traffic Management for Passenger Ports in Estonia
icon4 07 28th, 2011| icon3Comments Off on Barix IP Control Devices Provide Automated Traffic Management for Passenger Ports in Estonia

ITvilla implements Barix Barionet devices at the heart of a major automated access control system for efficient traffic management

ZURICH, SWITZERLAND, August 2, 2011 — Barix announced today that ITvilla, an automation consulting company in Estonia, has standardized on Barix Barionet IP devices for automated access control at four busy shipping ports in Estonia. The Barionet devices play a key role in solving access, traffic, and network management challenges, integrated within an automated ticket and traffic management system that more efficiently manages traffic flows and entry ticket validation for passengers and vehicles.

The Estonian ports serve as a base for vehicle ships taking passengers to destinations in Estonia on the Baltic Sea and to surrounding countries such as Finland. Traffic volume is significant all year, and is especially high during the summer months. This translated to traffic congestion and long delays for ticket and passenger validation when using the manual entry system at the port and onto the ships.

ITvilla, an Estonian automation consulting and system integration company, was contracted to support the E-Port Project for four passenger ports, with an objective to reduce load times and allow faster access to greater volumes of vehicle traffic.

“The manual validation process for vehicles and passengers prior to driving onto the vessels proved very time-consuming,” said Neeme Takis, CEO of ITvilla. “It was decided that automated entry ticket validation and traffic management of waiting lines would allow for more efficient access. The E-Port Project required an IP controller that could manage configuration data for all types of peripheral hardware, understand all communication protocols, and manage the entry and exit sensor behavior for multiple types of vehicles passing through the port.”

ITvilla chose the Barix Barionet as the automation controller between the periphery devices and the server of the access system. The Barix Barionet provides both the physical and logical interface between the server and the peripheral devices, storing the periphery device configuration and driver software. It also translates the signals and commands between the peripheral devices and the server, offloading the server from device-dependent processing. The Barionet controllers additionally offload the server from simpler tasks such as barrier closure decision-making, which happens after the expected number of vehicles has passed.

“The Barix Barionet controllers are the heart of the project, efficiently meeting all of the E-Port Project’s access and traffic management requirements,” said Neeme Takis, CEO of ITvilla. “The middleware based on Barix controllers features strong network management support, quickly finding and resolving problems with network peripherals, and remotely controls and monitors vehicles and their passengers. This results in vastly improved traffic management and vehicle flow even during peak volume seasons.”

The Barix Barionet controllers are also responsible for logging signals and actions onto an external network server, managing the manual control option for peripheral devices, and sending regular status and immediate action data to an external monitoring system. These controllers provide remote support, and track the status and health of all E-Port Project peripheral devices.

One Barionet controller located in the outdoor ticket terminal device controls the bar code readers, keypad, VFD, buzzer, barrier and numeric displays; and reads vehicle presence and height sensors for one entry lane to the port.

There are a total of 16 Barionet controllers and Barix IO12 extension modules in each port. The controllers are connected via a LAN, including an optical ring for the longest connections. The server is connected to the same LAN. The WLAN extension of the LAN enables control of the loading process from the board of the vessel, using PDA devices.

“The E-port Project is a nice example of the flexible and cost-effective use of the Barix Barionet in infrastructure projects,” said Johannes G. Rietschel, CEO and Founder of Barix AG. “The open Barix approach provides Barix partners with easy integration and utilization of Barix product offerings. Integrators and project managers can quickly and easily build unique solutions for challenging installations. The ease of use, coupled with strong product functionality in remote monitoring and automated access control, enabled ITvilla to easily write a custom application on the Barionet controllers that operates reliably on our standard, cost-effective devices.”

The Barix Barionet is a network-enabled, programmable automation controller for industrial automation and facility management systems. It is pre-loaded with a web configuration and user interface application for monitoring and control of all on-board I/O functions. Custom applications can be developed using the built-in BCL interpreter (Barix Control Language).

The Barionet supports standard interfaces such as SNMP, CGI, HTTP, and Modbus/TCP to access local I/O and program functions. It supports a broad variety of standard protocols such as TCP/IP, SNMP, HTTP, and CGI. It communicates over a standard built-in 10/100 Ethernet port, making the devices ideal for automation and monitoring applications in buildings, industry and IT systems.

Exstreamer 105 now available from stock !
icon4 07 25th, 2011| icon3Comments Off on Exstreamer 105 now available from stock !

All,

the newest family addition to the Barix Audio over IP devices, the Exstreamer 105, is now available !

The new Exstreamer 105 is a sibling to the Exstreamer 100, the well known IP Audio decoder from Barix. Instead of the USB connection, which provides an interface for flash memory to store audio files, the new 105 model is equipped with a MicroSD slot.

Ideal for instore audio applications, the MicroSD can hold backup audio content, for example, and the card does not stick out of the device. For special applications, a “closed” front can be made available which secures the memory in the device.

Please contact your local Barix distributor if you are interested in purchasing the new device. All standard software which runs on the Exstreamer 100 also supports the Exstreamer 105. The device is shipped with the “streaming client” firmware.

Greetings !

Johannes

Barix Integrates into C-MOR Remote Video Surveillance Solution, Announces Burglary Alarm Demo at IFSEC
icon4 05 13th, 2011| icon3Comments Off on Barix Integrates into C-MOR Remote Video Surveillance Solution, Announces Burglary Alarm Demo at IFSEC

Balingen Police Department will showcase burglary alarm triggers over the network; Barix IP devices will link an alarm system and the C-MOR video monitoring solution

ZURICH, SWITZERLAND, May 11, 2011 — Barix AG today announced its latest in a string of successful integration partnerships with leading software and solutions providers in the security and surveillance market. Barix has now partnered with za-internet GmbH, developer of the C-MOR remote video surveillance solution, to fully integrate Barix Barionet products into the C-MOR solution as universal, IP based I/O interfaces.

At IFSEC (May 16-19, 2011, NEC, Birmingham, England, Hall 4, Stand G155), Barix is planning a unique demonstration that will exhibit how Barix Barionet IP control and monitoring devices will be used in the burglary prevention center showroom of the Balingen Police Department in southern Germany to trigger alarms in C-MOR solutions.

C-MOR, a well-known, affordable remote video surveillance solution (www.c-mor.com) is available as software or as an appliance, targeting residential and commercial security markets. Popular commercial applications include surveillance in retail environments, horse stables, and gas stations.

The Barionet’s versatile I/O establishes communication between C-MOR and external “things” systems such as lights, security systems or motion sensors. Interfacing to sensors (motion sensors or a an alarm output of a security system) and actors such as lights, lock-down equipment and security system trigger inputs is fully supported. This functionality further allows C-MOR to serve as a versatile internet alarming upgrade for a traditional security system, as it can raise alarms over the internet to browser-capable mobile phones, supporting live video feeds of the site in alarm.

The Barionet product family is specially developed for automation and monitoring applications as well as interfacing solutions in buildings, industry and IT systems. Barionet devices provide an ideal link between hardware/hard-wired solutions and the IT world in an era of increased convergence.

In the case of the C-MOR integration, Barionet devices communicate with the surveillance solution via TCP/IP and with sensors and actors via traditional hardware interfaces such as contact closures and serial ports. Implementation with C-MOR is especially simple as the only tool needed is a standard web browser.

The Barionet 50 used in this application is a freely-programmable I/O device server with contact closure inputs, relay outputs and serial ports, so even highly specific and complex interface functions can be implemented. No programming is required for standard applications, and the device supports the most common IP-based standard protocols such as SNMP, web/cgi, Modbus/TCP and ASCII based I/O protocols.

Barix and SureView Systems Advance Integration Partnership
icon4 05 12th, 2011| icon3Comments Off on Barix and SureView Systems Advance Integration Partnership

SureView adds Barix Barionet IP control and monitoring solutions to Immix platform after success with Barix Audio over IP integration

ZURICH, SWITZERLAND, May 10, 2011 — Barix AG announces that SureView Systems, a commercial security monitoring service provider, has progressed its integration of Barix IP devices to an advanced, second phase.

The first phase began in 2009, when SureView integrated Barix Annuncicom two-way IP audio device support into its Immix platform. The Annuncicom integration allows the monitoring of unlimited remote audio surveillance locations and integration of intercom/help points within the Immix management solution — often consolidated with video surveillance.

SureView has now added support for Barix Barionet IP control, automation and monitoring equipment. The Barionet integration vastly increases I/O and relay interfacing capabilities of the Immix system, enabling SureView customers to easily connect a large number of security devices and functions to the network. Immix users activate controls and functions connected through Barionet devices, such as switching on lights and opening doors, through a simple press of a control button at a remote monitoring station.

The Barionet also enhances remote monitoring operations, allowing Immix users to directly interface motion detectors or building management sensors tied to HVAC, water, temperature, lighting, alarms and other systems for monitoring environmental and security aspects.

“The Barionet integration gives our customers a range of flexible deployment options, solving existing challenges and providing a more integrated, value-added solution to meet new customer requests,” said Craig Evans, director of SureView Systems. “Like the Annuncicom, the Barionet integrates seamlessly into the Immix platform so that the product itself is transparent. The customer simply presses a button to initiate an action, turning features on and off as if working a light switch.”

Evans added that the Barionet integration requires no addition training or expense for Immix customers. “It is exactly the same user-friendly experience,” he said.

The Annuncicom integration continues to prove successful in the professional security marketplace. Evans noted that Corps Security in Glasgow, Scotland, a leading security solutions provider in the UK, is the most recent customer, deploying the integrated remote surveillance solution to more than 50 sites in the UK.

“The success of the Annuncicom integration for improving audio quality at the surveillance point has been an ideal blueprint for how we can extend the partnership, notably through enhanced I/O and relay/sensor capabilities,” said Johannes G. Rietschel, CEO and Founder of Barix AG. “The Barionet will allow Immix users to bring more devices onto the network for control and monitoring purposes. This includes “actor” capabilities such as switching on lights and opening doors, as well as monitoring functions with motion and other sensors for surveillance purposes. The possibilities are boundless.”

The announcement comes as both companies prepare for the IFSEC 2011 professional security show, taking place from May 16-19 at NEC in Birmingham, England. Barix exhibits in Hall 4, Stand 155.

About SureView Systems (www.sureviewsystems.com)
SureView Systems owns, develops, sells and supports the Immix(R) product line. Immix(R) Enterprise and Cloud are video centric software platforms designed to receive alarm events from video, video analytics, access control, automation systems and GPS location aware devices. The products are UL Certified in the USA and BS8418 compliant in Europe.

Sureview Systems UK, Technium 1, Kings Road, Swansea SA1 8PH, UK. Tel. +44 1792 485600
Sureview Systems US, 400 N. Ashley Dr., Tampa, FL 33602, USA. Tel +1 (877) 712 8766

« Previous Entries Next Entries »